1. The amount of desulfurization liquid in the system is the most critical data affecting the investment and use effect. If the measured quantity is less than the actual quantity, although the investment estimation is low, the first dosage concentration determined according to the scheme can not meet the requirements, affecting the use effect. Therefore, the total amount of desulfurization liquid in the system should be estimated accurately to ensure the initial concentration of catalyst
2、催化剂应避光、防潮储存，储存环境温度不宜过高，正常环境储存质保期为 2年。
2. The catalyst shall be stored away from light and moisture. The storage ambient temperature shall not be too high. The warranty period for normal storage is 2 years.
3. After application, attention should be paid to monitoring the separation of desulphurizing liquid alkalinity and sulfur foam. Because sulfur content in high sulfur system will increase, the treatment capacity of sulfur melting kettle should be paid attention to.
4. The complex iron desulphurizing catalyst is not consumed theoretically in the desulphurizing liquid. However, because the loss of the catalyst will lead to the loss of sulphur foam or the loss of solution, it is difficult to avoid the desulphurizing solution. Therefore, regular desulfurization catalyst should be regularly added to the desulfurization solution to maintain the normal catalyst concentration in the desulfurization solution.
5、若脱硫负荷超过设计能力太多时，要适当提高吸收剂及催化剂的浓度。
5. If the desulfurization load exceeds the design capacity too much, appropriately increase the concentration of absorbent and catalyst.
6. Although the complex iron catalyst has the ability to resist oil interference, a large amount of tar and washing oil will bring into the desulfurization solution and affect the formation of sulfur foam in the desulfurization system. Therefore, the pretreatment of the gas into the desulfurization system should be well done.
企业二维码
2021-11-18
鲁公网安备37011202000764号号